WP8539324 Whirlpool Upper Spray Arm Mount
Part #: WPL WP8539324
Whirlpool Maytag Sears Kenmore Dishwasher Spray Arm MOUNT 8539324
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
Whirlpool Maytag Sears Kenmore Dishwasher Spray Arm MOUNT 8539324
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
Write Your Own Review
DIY Instructions: Replacing a Whirlpool Upper Spray Arm Mount (WP8539324)
1. Unplug your dishwasher from the power source, and turn off both the hot and cold water supply to the dishwasher.
2. Remove the spray arm from the dishwasher by unscrewing the retaining nut located at the center of the spray arm.
3. With the spray arm removed, locate the lower spray arm mount. Unscrew and remove the mount, and then remove the old upper spray arm mount (WP8539324).
4. Install the new upper spray arm mount (WP8539324).
5. Replace the lower spray arm mount and screw it into place.
6. Reattach the spray arm onto the upper spray arm mount. Secure the retaining nut.
7. Reconnect the hot and cold water supply to the dishwasher and plug the dishwasher back in.
8. Turn on the dishwasher and check that the new upper spray arm mount (WP8539324) is securely in place and is spinning properly.
By following these steps, you can easily replace your Whirlpool upper spray arm mount (WP8539324).
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug your dishwasher from the power source, and turn off both the hot and cold water supply to the dishwasher.
2. Remove the spray arm from the dishwasher by unscrewing the retaining nut located at the center of the spray arm.
3. With the spray arm removed, locate the lower spray arm mount. Unscrew and remove the mount, and then remove the old upper spray arm mount (WP8539324).
4. Install the new upper spray arm mount (WP8539324).
5. Replace the lower spray arm mount and screw it into place.
6. Reattach the spray arm onto the upper spray arm mount. Secure the retaining nut.
7. Reconnect the hot and cold water supply to the dishwasher and plug the dishwasher back in.
8. Turn on the dishwasher and check that the new upper spray arm mount (WP8539324) is securely in place and is spinning properly.
By following these steps, you can easily replace your Whirlpool upper spray arm mount (WP8539324).
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
