W10801996 Whirlpool Water Inlet Valve

100% Guaranteed genuine parts logo
The Ice Maker Water Inlet Valve supplies water to the ice maker to fill the water reservoir. If one of the solenoids in the valve has failed, replacing this part may alleviate the issue. This valve is a 120v, 16HZ and 15W valve. Replacing this part will require basic hand tools and some disassembly of the ice maker. Previous repair experience will be helpful but is not necessary. You must unplug the ice maker or shut off the house circuit breaker for the appliance before installing this part. Also be sure to turn off the water supply.

Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Ice Maker Water Inlet Valve
• Tools Needed: Multi screwdriver

Weight : 0.4888 lbs
Dimension : 4.4881 x 4.37 x 3.4645
$100.47
In stock
The Ice Maker Water Inlet Valve supplies water to the ice maker to fill the water reservoir. If one of the solenoids in the valve has failed, replacing this part may alleviate the issue. This valve is a 120v, 16HZ and 15W valve. Replacing this part will require basic hand tools and some disassembly of the ice maker. Previous repair experience will be helpful but is not necessary. You must unplug the ice maker or shut off the house circuit breaker for the appliance before installing this part. Also be sure to turn off the water supply.

Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Ice Maker Water Inlet Valve
• Tools Needed: Multi screwdriver

Weight : 0.4888 lbs
Dimension : 4.4881 x 4.37 x 3.4645
Write Your Own Review
Only registered users can write reviews. Please Sign in or Create an account

The following parts are replaced by this product

  1. 2185758
  2. 2185758
  3. 2217311
  4. 2315509
DIY Replacement of the Whirlpool W10801996 VALVE

Replacing the Whirlpool W10801996 valve is a relatively easy job that can be done in just a few simple steps. Before you start, make sure you have all the right tools and safety equipment.

Step 1: Turn off the power to the valve at the main circuit breaker.

Step 2: Disconnect the inlet and outlet supply lines from the valve.

Step 3: Remove the mounting screws that hold the valve to the wall.

Step 4: Remove the valve from the wall.

Step 5: Inspect the old valve for any damage or corrosion and replace if necessary.

Step 6: Install the new valve on the wall and secure with the mounting screws.

Step 7: Connect the new inlet and outlet supply lines to the valve.

Step 8: Turn the power back on to the valve at the main circuit breaker.

Step 9: Test for proper operation.

Following these steps will help ensure a successful DIY replacement of the Whirlpool W10801996 valve.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
Compatible with admiral Compatible with amana Compatible with jenn-air Compatible with kenmore Compatible with kitchenaid Compatible with magic_chef Compatible with maytag Compatible with norge Compatible with roper Compatible with whirlpool