Washer Parts

This Top Load Washer Leveling Leg is a metal replacement part that allows your appliance to sit perfectly flat. A stop nut is also included with this item. Install the new lev ...eling leg and test to see if you have it adjusted properly by putting the appliance on all four legs. Adjust the new part in or out as required if your washer is unsteady. Note that you may need assistance tilting and balancing the appliance while completing this repair. Replacing this part will require basic hand tools, but no disassembly or repair experience. Helpful Tip: We recommend checking the other three leveling legs on your appliance in case they are also damaged or worn and require replacement.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Leveling Leg• Tools Needed: Standard pliers Read More Read Less

Samsung Sears Kenmore Clothes Washer Washing Machine INNER DOOR BOOT DIAPHRAM CLAMP DC97-04981D

The Dryer Door Latch Kit includes the door latch and striker assembly. If your dryer door doesn’t close properly, replacing the strike and/or catch with the contents of this ... kit may alleviate the issue. To access the part, remove the screws that hold on the front panel of the dryer, and then remove the screws that hold in the hinges of the dryer door. You'll remove the dryer door and the front panel from the dryer. Release the top panel and lean it back so you can remove the front panel assembly. The door latch lives behind the front panel assembly. Installing these parts will require basic hand tools, minor disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Door Latch Kit• Tools Needed: Multi screwdriver, 5/16" nut driver Read More Read Less

The Front Load Washer Shipping Bolt Kit can be used whenever you need to move the appliance from one location to another. The kit includes (2) short bolts and (2) longer bolts ... that hold the wash tub and basket in place so that the washer can safely be transported without damage. The bolts attach on the rear of the appliance. This is a universal accessory that can be used across several brands; check to see if your model number is compatible. Installing this accessory will require basic hand tools and novice installation experience. Helpful Tip: Depending on the age of your washer, you may need a small saw to remove the plastic arms from the bolts before installation.Part Specification• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• Package contains (1) Front Load Washer Shipping Bolt Kit• Tools Needed: Multi screwdriver Read More Read Less

The Dryer Idler Belt goes between the motor and the tumbler, and puts tension on the dryer’s drum belt. If your dryer makes a persistent squeaking sound during operation, re ...placing this part may alleviate the issue. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Idler Belt• Tools Needed: Multi screwdriver, 5/16" nut driver Read More Read Less

This Front Load Dryer Thermal Cut Off Fuse is a safety device designed to protect the dryer from overheating. If your dryer won't start, won't produce heat, shuts off too soon ... or won't tumble, replacing the cut off fuse may alleviate these issues. The thermal cut off is located behind the dryer's lower access panel and attaches to the exhaust duct. Several wire terminals are included for installation depending on the part number you are replacing. A multimeter can be used to test the fuse. Always check the dryer venting when replacing a blown thermal fuse. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Front Load Dryer Thermal Cut Off Fuse• Tools Needed: Multi screwdriver, putty knife, 5/16" nut driver Read More Read Less

This Front Load Washer Water Inlet Valve lets the hot water into your washing machine and distributes it around to the dispensers. If the valve is leaking during use, replacin ...g this part may alleviate the issue. A long or slow fill cycle is often due to a restricted water valve. Note that the valve should never be disassembled and cleaned, only replaced. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Front Load Washer Water Inlet Valve• Tools Needed: Multi screwdriver, pliers Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Front Load Washer Water Inlet Valve lets the hot and cold water into your washing machine and distributes it around to the dispensers. If the current valve is leaking wat ...er on the floor or the solenoids are damaged, replacing this part may alleviate these issues. Usually, a long or slow fill cycle is often due to a restricted water valve. Please note: The valve should never be disassembled and cleaned, only replaced. Replacing this part will require basic hand tools, some disassembly of the washer and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Washer Water Inlet Valve• Tools Needed: Multi screwdriver, putty knife, pliers Read More Read Less