PA Categories

This everydrop® Ice Filter is used in 50 LB. Ice Makers. This NSF certified filter reduces chlorine taste and odor and scale build up. Replace every 2,000 gallons (7571 liter ...s) or 9 months to ensure clean safe drinking water. The contaminants or other substances removed or reduced by this water filter are not necessarily in all users water.Part Specification• Filters should be changed every 9 months Read More Read Less

Hood filter works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of stoves / ovens / ranges.

This Gas Oven Igniter Assembly will replace a broken bake or broil igniter in your gas range. You may need this part if the element no longer lights, or if the igniter of your ... oven glows for more than 90 seconds without lighting the gas flame – this indicates that the igniter is too weak to properly open the valve to allow the gas to feed through. Note that the igniter must glow white hot to properly light the oven; if it glows red or orange it is not functioning properly. Replacing this part will require basic hand tools, some disassembly of the oven and novice repair experience. You must unplug the oven or shut off the house circuit breaker for the appliance before installing this part. Also make sure to turn off the gas valve before the repair. Helpful Tip: You may need a Wire Splicer (item 3527618) to attach the connector from the old part to the new one so you can complete the installation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Gas Oven Igniter Assembly• Tools Needed: Multi screwdriver Read More Read Less

• This EDR5RXD1 Water Filter (Pink) is specifically designed to diminish up to 99% of lead, ensuring enhanced safety and purity for your drinking water. • Tested ... and certified, it effectively eliminates 27 types of contaminants including lead, pesticides, pharmaceuticals, and waterborne parasites, meeting NSF standards 401, 53, and 42. • Engineered to provide water that is not only clean but also has a fresh and pure taste. • Each EVERYDROP filter replaces 1,500 plastic water bottles saved, making it an environmentally conscious option. • Used in top freezer refrigerators. Filter compartment is in the bottom left corner of the refrigerator. • Certified to fit these leading refrigerator brands: Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper. • For the best quality water, it's recommended to replace the filter every six months or 120 gallons to maximize contaminant reduction. Read More Read Less

This Gas Range Spark Module creates the spark for lighting the gas for the range's surface burners. To access the part, you’ll need to remove the large panel on the rear of ...the range's console. Note that transferring the wires from the old part to the new part one at a time will help prevent incorrect installation. Replacing this part will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part. Also make sure to turn the gas valve off before the repair.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Gas Range Surface Burner Spark Module• Tools Needed: Multi screwdriver Read More Read Less

This Range Sealed Gas Burner Head Assembly directs your oven's gas to the burner head. If the ceramic is cracked on your range or if the burner no longer ignites, replacing th ...is part may alleviate these issues. To install the new part, remove the old burner assembly by turning it counter clockwise by hand. If you are unable to loosen the old burner by hand, using a strap wrench may help. When you remove the ground and the spark wires from the old burner head, make sure they don't fall back into the range top. Turn the new burner head clockwise to lock when replacing. Replacing this part will require no disassembly or repair experience. You must unplug the appliance or shut off the house circuit breaker before installing. Also turn off the gas supply that's connected to your range.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Range Sealed Gas Burner Assembly• No tools required for installation Read More Read Less

The Range Temperature Sensor measures the oven temperature. If your oven isn't holding the correct temperature, replacing this part may alleviate the issue. Remove the rear ac ...cess panel to access the old sensor. Depress the tab to disconnect the sensor wire connector. unscrew the sensor mounting screw and pull out the old sensor. Insert the new sensor into the hole of the rear panel and replace the mounting screw to secure. Reconnect the wire connector and secure the access panel back into place. Installing this part will require basic hand tools, some disassembly of the range and novice repair experience. Remember to unplug the range or shut off the house circuit breaker for the appliance before installing. Also make sure to shut off the gas.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Range Temperature Sensor• Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Range Surface Burner Spark Module produces sparks that ignite the top gas burners on your range. If one or more of your top burners won't spark, replacing the module may ...alleviate this issue. This kit includes the (1) module, (1) mounting bracket, (2) connectors, (1) Phillips screw. The terminals supplied should not be used if they are different in size than the current terminals. To access the part, you'll remove the back panel of your range. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you shut off the gas to the range.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Range Surface Burner Spark Module Kit• Tools Needed: Multi screwdriver, needle nose pliers, 1/4" nut driver Read More Read Less

This Gas Range Surface Burner Spark Igniter sparks to light the oven surface burner. The most common reasons for replacing the burner spark electrodes are when the oven doesn? ...??t bake evenly, won’t heat, or won’t turn on. Replacing this part will require basic hand tools, some disassembly of the oven and novice repair experience. You must unplug the oven or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Gas Range Surface Burner Spark Igniter• Tools Needed: Phillips-Head screwdriver, 1/4" nut driver Read More Read Less