PA Categories

Vent damper works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of microwaves.

Maytag RCA Whirlpool Magic Chef KitchenAid Roper Norge Sears Kenmore Admiral Amana Microwave Oven INVERTER BOARD W10510105We are a Factory Authorized Parts Distributor for Whi ...rlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs. Read More Read Less

This Range Sealed Gas Burner Head Assembly directs your oven's gas to the burner head. If the ceramic is cracked on your range or if the burner no longer ignites, replacing th ...is part may alleviate these issues. To install the new part, remove the old burner assembly by turning it counter clockwise by hand. If you are unable to loosen the old burner by hand, using a strap wrench may help. When you remove the ground and the spark wires from the old burner head, make sure they don't fall back into the range top. Turn the new burner head clockwise to lock when replacing. Replacing this part will require no disassembly or repair experience. You must unplug the appliance or shut off the house circuit breaker before installing. Also turn off the gas supply that's connected to your range.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Range Sealed Gas Burner Assembly• No tools required for installation Read More Read Less

This SxS Refrigerator Ice Auger Motor drives the auger in the ice bucket, and pushes the ice cubes through the dispenser chute. When removing the old motor, be sure to support ... it when releasing the last screw. The design of the new Auger Motor has been slightly altered to include a washer that stretches over the drive shaft. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) SxS Refrigerator Ice Auger Motor• Tools Needed: Multi screwdriver, ratchet, 12mm deep well socket Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Range Surface Burner Spark Module produces sparks that ignite the top gas burners on your range. If one or more of your top burners won't spark, replacing the module may ...alleviate this issue. This kit includes the (1) module, (1) mounting bracket, (2) connectors, (1) Phillips screw. The terminals supplied should not be used if they are different in size than the current terminals. To access the part, you'll remove the back panel of your range. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you shut off the gas to the range.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Range Surface Burner Spark Module Kit• Tools Needed: Multi screwdriver, needle nose pliers, 1/4" nut driver Read More Read Less

This Gas Range Surface Burner Spark Igniter sparks to light the oven surface burner. The most common reasons for replacing the burner spark electrodes are when the oven doesn? ...??t bake evenly, won’t heat, or won’t turn on. Replacing this part will require basic hand tools, some disassembly of the oven and novice repair experience. You must unplug the oven or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Gas Range Surface Burner Spark Igniter• Tools Needed: Phillips-Head screwdriver, 1/4" nut driver Read More Read Less

This SxS Refrigerator Thermostat regulates the temperature in your refrigerator by switching the compressor on and off. If your refrigerator's compressor is constantly running ..., won't come on, or runs without holding the correct temperature, replacing this part may alleviate these issues. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator's water supply before you begin. Recommended Item: Refrigerator and Freezer Thermometer (item 8171720). This thermometer shows temps from -20 to 80 degrees Fahrenheit. Thermometer face has special markings to show where food is safe and where it is at risk of spoilage.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) SxS Refrigerator Thermostat• Tools Needed: Multi screwdriver Read More Read Less

This Refrigerator Ice Cutter Grid Complete Assembly is located within the main unit of the ice maker, and contains thin, heated wires that slice the ice into cubes that are th ...en deposited in the ice bin. If the cutter grid is broken, ice can back up within the ice maker. This part is sold as a complete assembly and is used with freestanding ice makers. The kit includes all the hardware needed to attach the wire to the frame. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Refrigerator Ice Cutter Grid Complete Assembly• Tools Needed: Multi screwdriver Read More Read Less

The Whirlpool W10245216 Grill-Vent Kit is the perfect addition to any kitchen. It is designed to convert your existing range hood into a ventilation system that helps to reduc ...e smoke, steam, and odors in your kitchen. This kit includes a durable black steel grille, adjustable mounting clips, and easy installation instructions. The aluminum slats on the grille help to defuse and channels the airflow within your cooking area. This grill-vent allows for maximum ventilation and improved air quality so you can enjoy healthier, safer cooking experiences. With its stylish design and easy installation, you will love having this helpful addition to your kitchen. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs! Read More Read Less