DC96-01585D Samsung Washer Water Drain Pump
Samsung Sears Kenmore Clothes Washer Washing Machine WATER DRAIN PUMP DC96-01585D
Weight : 2.4173 lbs
Dimension : 6 x 7 x 8
Samsung Sears Kenmore Clothes Washer Washing Machine WATER DRAIN PUMP DC96-01585D
Weight : 2.4173 lbs
Dimension : 6 x 7 x 8
Write Your Own Review
DIY Steps to Replace the DC96-01585D Samsung Washer Water Drain Pump
1. Unplug the washing machine from its power source.
2. Locate the water pump and disconnect the two electrical wires connecting it to the washer control panel.
3. Unscrew the clamp holding the drain hose in place, then pull the hose free from the drain pump housing.
4. Unscrew the four mounting screws securing the pump to the washer and remove it.
5. Place the new DC96-01585D Samsung Washer Water Drain Pump into position and secure it with the four mounting screws you removed.
6. Reconnect the drain hose and tighten the clamp.
7. Connect the wires to the pump and back onto the washer control panel.
8. Test the washer by powering it on and running a cycle.
9. Once the cycle is complete, unplug the washer and check the discharge hose for any leaks. Tighten the clamps if necessary.
By following these simple instructions, you can replace your old DC96-01585D Samsung Washer Water Drain Pump with ease and boost your washing machine's performance!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the washing machine from its power source.
2. Locate the water pump and disconnect the two electrical wires connecting it to the washer control panel.
3. Unscrew the clamp holding the drain hose in place, then pull the hose free from the drain pump housing.
4. Unscrew the four mounting screws securing the pump to the washer and remove it.
5. Place the new DC96-01585D Samsung Washer Water Drain Pump into position and secure it with the four mounting screws you removed.
6. Reconnect the drain hose and tighten the clamp.
7. Connect the wires to the pump and back onto the washer control panel.
8. Test the washer by powering it on and running a cycle.
9. Once the cycle is complete, unplug the washer and check the discharge hose for any leaks. Tighten the clamps if necessary.
By following these simple instructions, you can replace your old DC96-01585D Samsung Washer Water Drain Pump with ease and boost your washing machine's performance!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
