PA Categories

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Dryer Thermal Cut Off Kit is a safety device designed to protect the dryer from overheating. A multimeter can be used to test the fuse. Always check the dryer venting whe ...n replacing a blown thermal fuse. To access the part, you'll need to remove the back panel of your dryer. This kit includes one thermal cut-off (360 degrees) and one hi-limit thermostat (250 degrees). If your dryer isn't heating as expected, replacing this part may alleviate the issue. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Thermal Cut Off Kit• Tools Needed: Multi screwdriver Read More Read Less

The Dishwasher Water Inlet Valve allows the appliance to fill with water and complete the cleaning cycle. If your dishwasher won't fill properly or overflows and leaks water o ...n the floor, then the water valve may be restricted or damaged and will need replacement. Note that if the dishwasher is underfilling, it will most likely exhibit poor wash performance. This 7-watt, 120-volt coil, 3/8" brass inlet water valve includes the mounting bracket. Installing this part will require basic hand tools, some disassembly of the dishwasher and novice repair experience. Remember to unplug the dishwasher or shut off the house circuit breaker for the appliance before installing this part. Also be sure to turn off the water supply to your dishwasher before you begin. Note that you will need to reuse the brass fitting from the existing part with the new valve; use pipe joint compound to securely attach it to the new part. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dishwasher Water Inlet Valve• Tools Needed: Multi screwdriver Read More Read Less

The Dryer Idler Pulley Wheel Kit sits between the motor and the drum of the dryer, putting tension on the drive belt. If the idler wheel no longer spins inside your appliance, ... replacing this part may alleviate the issue. This kit comes with a tri-ring and washer. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part. Recommended Part: Consider replacing the Drive Belt (item #661570V) at the same time you complete this repair. The drive belt is a very long, slender belt that wraps all the way around the dryer drum, around a tension pulley, and then around the drive motor pulley.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Idler Pulley Kit• Tools Needed: Multi screwdriver Read More Read Less

The Dryer Heating Element is a replacement part for heating element coils that short out, causing your dryer to no longer produce the heat necessary to dry your clothes. If yo ...ur dryer is not heating as expected, replacing this part may alleviate the issue. Note that we recommend first checking for a blown thermal fuse on the blower housing before replacing the heating element. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Helpful Tip: The heating element and many other parts can be tested using a volt/ohm meter.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Heating Element• Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Dishwasher Water Inlet Valve Assembly is located behind the access panel at the bottom of your dishwasher and lets the water flow into the appliance during use. If your d ...ishwasher isn't getting any water, replacing this part may alleviate the issue. If your dishwasher has a solid copper fill line, you'll want to disconnect the water line before pulling the old valve out. If you have the flexible fill line, you can remove the old valve before disconnecting the water line. Be sure to clean out the threads and add new pipe dope to the brass fitting connected to the old valve before transferring it to the new valve. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the water supply under the sink. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) once a month or as needed, to help remove limescale and mineral buildup that can affect your dishwasher's performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dishwasher Water Inlet Valve Assembly• Tools Needed: pliers, 5/8" and 3/4" wrench, 1/4" nut driver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This White Appliance Spray Paint can be used to correct scratches and chips on several brands and models; check to see if this paint matches your appliance before ordering. Yo ...u can also use this paint to correct the look of handles or other areas that have discolored due to wear. Pressurized can contains 12 oz. of paint.Part Specification• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• Package contains (1) White Appliance Spray Paint• No tools required for installation Read More Read Less