77-2018 Greenwald Cobra Key (Need Code)

DIY: How to Replace the Greenwald Industries 77-2018 KEY,COBRA

1. Gather the necessary supplies you will need to replace the Greenwald Industries 77-2018 KEY,COBRA. The supplies you need are a blank key, the Greenwald Industries 77-2018 KEY,COBRA code and a pair of needle nose pliers.

2. Insert the blank key into the Greenwald Industries 77-2018 KEY,COBRA lock and make sure it fits.

3. Use the needle nose pliers to grip the tab that is in the slot on the face of the lock and pull it out. This will release the plug assembly from the body of the lock.

4. Once the plug assembly is released, the capacitor and tumbler chamber will become visible.

5. Carefully remove the capacitor from the plug assembly and set it aside.

6. Place the Greenwald Industries 77-2018 KEY,COBRA code in the tumbler chamber of the lock.

7.Replace the capacitor over the key code and make sure it is secured in place.

8. Insert the plug assembly back into the body of the lock, making sure the tab is secured all the way.

9. Insert the blank key into the Greenwald Industries 77-2018 KEY,COBRA lock and turn it to check that the lock has been successfully replaced with the new key.

10. After the Greenwald Industries 77-2018 KEY,COBRA has been successfully replaced, you should use content (such as titles, descriptions and headings) to let potential customers know how easy it was to replace the lock.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.