WR60X10204 GE Refrigerator Evaporator Fan Blade

Step 1: Unplug the power cord to the appliance and turn off the circuit breaker controlling the appliance.

Step 2: Locate the evaporation coil inside the appliance. This is a metal panel with coils used for cooling and freezing.

Step 3: Remove the screws holding the metal panel in place. You may need a flathead screwdriver or Phillips head screwdriver, depending on the type of screws used.

Step 4: Remove the old fan blade by unscrewing the blade from the motor shaft.

Step 5: Clean the evaporator fan blade before installing the new one.

Step 6: Install the new fan blade and ensure that it is firmly secured to the motor shaft.

Step 7: Reassemble the metal panel and replace all screws.

Step 8: Plug the power cord back into the appliance and turn the circuit breaker back on.

Step 9: Test the new fan blade to ensure it is working properly.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.