Roper Appliance Parts

Whirlpool W11410063 CNTRL-ELEC+CORE We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Washer Agitator Bolt keeps the agitator cycle in your washer performing correctly, and has a rubber gasket and thread sealant. The bolt head is 7/16" diameter. If your was ...her is making an unusual noise during the wash cycle, the bolt is most likely damaged. To access the bolt, you'll first need to remove the fabric softener dispenser and then the barrier cap. Installing this part will require basic hand tools, some disassembly of the washer and novice repair experience. You should unplug the appliance or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Washer Agitator Bolt• Tools Needed: Ratchet, 5/16" socket with extension Read More Read Less

Optimize your dishwasher's performance with this high-quality electronic control core designed specifically for Whirlpool and several compatible brands. As an essential compon ...ent, this circuit board, timer, and overlay work seamlessly to Maintain the efficiency of your dishwasher. This part is compatible with various brands, including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, and Roper, making it a versatile choice for many households. Whether you're facing issues with cycle timing or control settings, replacing your electronic control core can restore your appliance to its optimal working condition. Invest in this reliable component to ensure your dishwasher continues to deliver exceptional cleaning results, maintaining the hygiene and convenience that modern kitchens demand. Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Dryer Door Switch Assembly senses if the door of your dryer is properly closed. If the door handle is broken or your dryer does not start as expected, then replacing the d ...oor switch may alleviate these issues. Note that this part also replaces older 2-terminal switches. To access the part, remove the screws from the lint screen if necessary and use a putty knife to release the tabs holding the top panel of the dryer on. The door switch is located in the upper corner of the dryer next to the switch actuator. The new switch may have an extra wire that isn't used. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Helpful Tip: A multimeter can be used to test the door switch for continuity before you begin this repair.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Door Switch Assembly• Tools Needed: Phillips-Head screwdriver, putty knife Read More Read Less

This Refrigerator Defrost Thermostat is a safety device that clips onto the evaporator in the freezer. The thermostat turns off the defrost heater in case it gets too warm in ...the freezer section. If your refrigerator does not defrost, replacing the thermostat may alleviate this issue. To access the part, open the freezer door and remove the shelves, mounting brackets (if they release), and the ice bucket. After you remove the back panel, the defrost thermostat is mounted to the end of the evaporator. Replacing the element will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Refrigerator Defrost Thermostat• Tools Needed: Multi screwdriver, wire splicing tool Read More Read Less

W10219156 Whirlpool Tub-Seal

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.