Maytag Appliance Parts

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Dryer Door Switch contains 3 metal terminals and senses if the door of your dryer is properly closed to prevent the appliance from running when the door is ajar. If your d ...ryer does not start as expected or the door will not close, then the door switch could be broken or defective and should be replaced. Note that this part is the door switch only and does not include the mounting clip. Replacing this part will require basic hand tools, minor disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part. Helpful Tip: A multimeter can be used to test the door switch for continuity before you begin this repair.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Door Switch• Tools Needed: Multi screwdriver, putty knife Read More Read Less

This Front Load Washer Drain Hose carries used water from the washer to your house drain. To access the part, remove the back panel of your washer, then the lower front access ... panel. When disconnecting any hoses, place a towel down to catch any water. You'll need to transfer over the old clamps to the new hose. Replacing this part will require basic hand tools, some disassembly of the washer and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Front Load Washer Drain Hose• Tools Needed: Multi screwdriver, standard pliers, torque 20 screwdriver Read More Read Less

This is a genuine OEM item made by Comfort Aire. NOTE: When ordering parts from the website, please verify your part number is correct for your model before ordering. Parts ma ...y look the same but the size and shape can have small variations. Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This ceramic Gas Oven Flat Style Igniter Kit replaces any flat oven igniter where the ceramic is at least 5" long. If the element itself shorted out or if the igniter of your ...oven glows for more than 90 seconds without lighting the gas flame, replacing this part may alleviate these issues. The igniter must glow white hot to correctly light the oven; if it glows red or orange it is not functioning as it should. Note that you'll need to reuse the metal shield from old igniter and that this part does not replace round igniters or igniters with blue ceramic. Be sure to handle the grey coil with care when installing. Replacing this part will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part. Also make sure you shut off the gas to the range.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Gas Oven Flat Style Igniter Kit• Tools Needed: Multi screwdriver Read More Read Less