DE81-02161A Samsung Assembly Knob
Part #: SMG DE81-02161A
Gas cooktop knob works with some Dacor models of cooktops.
Gas cooktop knob works with some Dacor models of cooktops.
Write Your Own Review
DIY Instructions for Replacing the Samsung DE81-02161A SVC-ASSY KNOB
Replacing the Samsung DE81-02161A SVC-ASSY Knob is a simple do-it-yourself repair that can be done in a few easy steps. Here’s what you’ll need to get started:
Tools Needed for the Job:
● Philips-head screwdriver
● Flathead screwdriver
● Needle-nose pliers
Step 1: Unplug the Range from Power Source
Before beginning any repairs, be sure to unplug your range from the power source to avoid potential electric shocks.
Step 2: Remove Old Knob
Using the Philips-head screwdriver, remove the two screws and set aside. Using the flathead screwdriver, gently pry off the old knob. Place the knob aside for disposal.
Step 3: Install New Knob
Using the new knob and the needle-nose pliers, firmly attach the knob to the dial shaft. Make sure the knob is properly aligned and secure.
Step 4: Replace and Secure Screws
Using the Philips-head screwdriver, replace the two screws and tighten until secure. Test the knob to ensure it is functioning properly.
You’ve successfully replaced the Samsung DE81-02161A SVC-ASSY Knob! Congratulations!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the Samsung DE81-02161A SVC-ASSY Knob is a simple do-it-yourself repair that can be done in a few easy steps. Here’s what you’ll need to get started:
Tools Needed for the Job:
● Philips-head screwdriver
● Flathead screwdriver
● Needle-nose pliers
Step 1: Unplug the Range from Power Source
Before beginning any repairs, be sure to unplug your range from the power source to avoid potential electric shocks.
Step 2: Remove Old Knob
Using the Philips-head screwdriver, remove the two screws and set aside. Using the flathead screwdriver, gently pry off the old knob. Place the knob aside for disposal.
Step 3: Install New Knob
Using the new knob and the needle-nose pliers, firmly attach the knob to the dial shaft. Make sure the knob is properly aligned and secure.
Step 4: Replace and Secure Screws
Using the Philips-head screwdriver, replace the two screws and tighten until secure. Test the knob to ensure it is functioning properly.
You’ve successfully replaced the Samsung DE81-02161A SVC-ASSY Knob! Congratulations!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.