DC97-12528A Samsung Washer Flange Shaft Spider Arm Assembly
Washer outer rear drum support flange shaft assembly for some models of Samsung clothes washing machines.
Weight : 2.2491 lbs
Dimension : 8.2677 x 8.0709 x 4.685
Washer outer rear drum support flange shaft assembly for some models of Samsung clothes washing machines.
Weight : 2.2491 lbs
Dimension : 8.2677 x 8.0709 x 4.685
Write Your Own Review
Replacing the DC97-12528A Samsung Washer Flange Shaft Spider Arm Assembly
This guide will show you step-by-step how to replace the DC97-12528A Samsung Washer Flange Shaft Spider Arm Assembly. This part is responsible for helping the inner washer tub spin correctly. When the part fails, customers may notice a noise coming from the machine or clothes not coming out clean.
What You’ll Need:
-Phillips Head Screwdriver
-5/16ths nut driver
-DC97-12528A Samsung Washer Flange Shaft Spider Arm Assembly
Step 1: Disconnect Power
First, disconnect power to your Samsung washer. Doing this will reduce the risk of injury from electric shock or electrocution. If the unit is hardwired, turn the main power off. If the unit is plugged into an outlet, unplug it.
Step 2: Accessing the Spider Arm Assembly
Now that the power is disconnected, locate the access panel on the back of your washer and remove the screws using a Phillips head screwdriver. Carefully remove the access panel, set aside, and locate the flange shaft spider arm assembly.
Step 3: Removing the Old Spider Arm Assembly
Using a 5/16th nut driver, remove the two mounting screws that hold the spider arm assembly in place. Gently lift the old spider arm assembly out of the machine and discard.
Step 4: Installing the New Spider Arm Assembly
Replace the old assembly with the new one. Make sure it’s firmly in place and the mounting screws are securely fastened. Replace the access panel and screws.
Step 5: Reconnect Power
Finally, reconnect power to your Samsung washer. Double check to make sure everything is secure and the panel is properly fastened.
And that’s it! You have successfully replaced the DC97-12528A Samsung Washer Flange Shaft Spider Arm Assembly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
This guide will show you step-by-step how to replace the DC97-12528A Samsung Washer Flange Shaft Spider Arm Assembly. This part is responsible for helping the inner washer tub spin correctly. When the part fails, customers may notice a noise coming from the machine or clothes not coming out clean.
What You’ll Need:
-Phillips Head Screwdriver
-5/16ths nut driver
-DC97-12528A Samsung Washer Flange Shaft Spider Arm Assembly
Step 1: Disconnect Power
First, disconnect power to your Samsung washer. Doing this will reduce the risk of injury from electric shock or electrocution. If the unit is hardwired, turn the main power off. If the unit is plugged into an outlet, unplug it.
Step 2: Accessing the Spider Arm Assembly
Now that the power is disconnected, locate the access panel on the back of your washer and remove the screws using a Phillips head screwdriver. Carefully remove the access panel, set aside, and locate the flange shaft spider arm assembly.
Step 3: Removing the Old Spider Arm Assembly
Using a 5/16th nut driver, remove the two mounting screws that hold the spider arm assembly in place. Gently lift the old spider arm assembly out of the machine and discard.
Step 4: Installing the New Spider Arm Assembly
Replace the old assembly with the new one. Make sure it’s firmly in place and the mounting screws are securely fastened. Replace the access panel and screws.
Step 5: Reconnect Power
Finally, reconnect power to your Samsung washer. Double check to make sure everything is secure and the panel is properly fastened.
And that’s it! You have successfully replaced the DC97-12528A Samsung Washer Flange Shaft Spider Arm Assembly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
