WR57X10051 GE Refrigerator Water Valve Kit
The WR57X10051 GE Water Valve Kit is an ideal solution for your maintenance needs. This kit includes a cold water inlet valve, solenoid coil with mounting bracket, and filter screen. It is designed to work with many brands and models of refrigerators, including GE, Hotpoint, and RCA. The valve is constructed from high-quality materials and components, so you can count on reliable performance and service. The easy-to-install design makes replacement simple and straightforward. With the WR57X10051 GE Water Valve Kit, you can ensure that your water valve is working properly, ensuring your safety and that of your family. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 1.5536 lbs
Dimension : 8.7795 x 5.433 x 4.5275
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The WR57X10051 GE Water Valve Kit is an ideal solution for your maintenance needs. This kit includes a cold water inlet valve, solenoid coil with mounting bracket, and filter screen. It is designed to work with many brands and models of refrigerators, including GE, Hotpoint, and RCA. The valve is constructed from high-quality materials and components, so you can count on reliable performance and service. The easy-to-install design makes replacement simple and straightforward. With the WR57X10051 GE Water Valve Kit, you can ensure that your water valve is working properly, ensuring your safety and that of your family. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 1.5536 lbs
Dimension : 8.7795 x 5.433 x 4.5275
Write Your Own Review
The following parts are replaced by this product
- WR57X10018
- IMV513
- WR57X104
- WR57X111
- WR57X119
- WR57X98
- WR57X99
- WR57X92
- WR57X0092
- WR57X0098
- WR57X0099
- WR57X0104
- WR57X0111
- WR57X0119
- WR57X10051-25PK
DIY Instructions for Replacing a WR57X10051 GE Water Valve Kit
1. Shut off water to the appliance. Before beginning any repair, make sure the power is off to avoid electric shock and water damage. Locate the shut-off valve and turn it clockwise to close the water supply to the refrigerator.
2. Unplug the appliance. For safety reasons, it's important to unplug any refrigerator before repairing it.
3. Remove the back panel. Using a screwdriver, remove the screws on the back panel of the refrigerator and gently pull it away from the wall.
4. Remove the water valve. The water valve will be connected to the water line with a hose clamp. Use a pair of needle nose pliers or a screwdriver to loosen the clamp and remove the hose.
5. Disconnect the wiring harness. To disconnect the wiring harness, gently pull apart the clips that are holding the wires in place.
6. Install the new water valve. Use a wrench to tighten the mounting bracket into place and connect the water line to the new valve with a hose clamp. Connect the wiring harness to the new valve. Make sure all connections are secure.
7. Test the new water valve. Turn the water supply back on and test the new water valve to make sure it's working.
8. Replace the back panel. Gently push the back panel back into place and use a screwdriver to tighten the screws.
9. Clean up. Clean up any mess you may have made during the installation and make sure all the tools are put away.
Congratulations! You have successfully replaced the WR57X10051 GE Water Valve Kit.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Shut off water to the appliance. Before beginning any repair, make sure the power is off to avoid electric shock and water damage. Locate the shut-off valve and turn it clockwise to close the water supply to the refrigerator.
2. Unplug the appliance. For safety reasons, it's important to unplug any refrigerator before repairing it.
3. Remove the back panel. Using a screwdriver, remove the screws on the back panel of the refrigerator and gently pull it away from the wall.
4. Remove the water valve. The water valve will be connected to the water line with a hose clamp. Use a pair of needle nose pliers or a screwdriver to loosen the clamp and remove the hose.
5. Disconnect the wiring harness. To disconnect the wiring harness, gently pull apart the clips that are holding the wires in place.
6. Install the new water valve. Use a wrench to tighten the mounting bracket into place and connect the water line to the new valve with a hose clamp. Connect the wiring harness to the new valve. Make sure all connections are secure.
7. Test the new water valve. Turn the water supply back on and test the new water valve to make sure it's working.
8. Replace the back panel. Gently push the back panel back into place and use a screwdriver to tighten the screws.
9. Clean up. Clean up any mess you may have made during the installation and make sure all the tools are put away.
Congratulations! You have successfully replaced the WR57X10051 GE Water Valve Kit.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
